Compsee Apex III Manual de usuario descargar pdf (Pagina 20)

Terminal Setup

AirLoad Execution

Once the terminal reboots, Airloader will automatically search for the Airloader server.

If no server is found, the following message will appear on the terminal.

Select

Yes to download Airloader. Enter the Airloader Manager IP address.

Select

No if the Airloader Manager IP address is unknown or if and the Airloader

manager is not preferred.

Yes is selected, enter the IP address. If no is selected, proceed to Manual

Configuration Update.

Press

Enter to save.

Cold Boot the terminal and proceed to Starting a Telnet Session.

No Airload Manager was found on this segment.

Do you want to enter the IP address of the Airload

Manager? Yes/No

Airload Manager IP Address

2 0 7 . 2 4 1 . 7 8 . 1

Manual Configuration Update

The configuration files can be downloaded manually if:

• The configuration files have been modified, since the initial download.

• The configurations had not been downloaded previously.

Connecting the Cradle

The terminal download requires a serial connection between the terminal and the PC

through a cradle. In preparation for this download perform the following:

• Connect the selected serial port on the PC to the cradle with the manufacturers

cable.

• Verify that the cradle is powered on.

Preparing the Terminal to Receive Files

On the portable terminal, power the terminal Off, then boot the terminal pressing the

Power and Scan key.

The terminal boots to the DOS prompt. To activate the IRDA port for the serial file

transfer, from the terminal, type

IR ON and press Enter.

Supported Equipment Manual

•

May, 2006

2-12

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 73 74

Sin comentarios

Compsee Apex III Manual de usuario Pagina 20